XYZ (est1998) is a leading Asian manufacturer and supplier of high performance coilover suspension kits.

Being a coilover kit it allows you to adjust height and shock dampening to your ‘I want’ requirements. Only a few simple adjustments and your vehicle goes from street to track specifications.

XYZ have coilover kits avaliable for Australian , Asian and some European vehicles. Our well skilled mechanics have already fitted a few kits to vehicles that have been road tested and have received extremely positive feedback.

Call WA Suspensions for a quote on a new ‘ XYZ ‘ kit (from $1650) or just a chat for some advice about what is best for your vehicle.

We have Found in many of our workshop inspections of these vehicles that the lower control arm bush can show a high degree of disintergration and bond failure causing excessive toe-in and therefore a high degree of tyre wear which can happen all too quickly.

SuperPro use a redesigned 3 piece bush which has a void style inner section and 2 outer end thrust bushes (that are easy to fit, should you be inclined to do the work yourself). Also SuperPro Bushes have very low NVH levels, maintaining a quiet and comfortable ride providing improved steering geometry.

Due to limited visability of the LCA Bushes you are welcome to use our free inspection service with out any obligation should your E Series be suffering tyre wear, steering wheel off centre or tyre squeal during low speed turns which is indicative of toe-in problems.

Super value at under $600 for a set of 4.

From the worlds largest shock absorber manufacturer. Quality and performance you could expect.

For standard height and upto 50mm lift. For superior handling and control both off and on road.

Also available for many Toyota and Nissan 4 Wheel Drive vehicles from $236p per pair. For more information the KYB Skorched4′s, please visit www.kyb.com.au

A set of custom made Ride height and valve adjustable coilovers will do the trick to keep you in contact with the tarmac at any level!

Wheather your car is a daily driver, a full spec race or somewhere in between, you can get outstanding performance from your E series when using our custom built coilovers.

We use the top quality, proven and world renowned products of Koni Shock absorbers and Eibach  Coils to get adjustable ride height and shock valving to customise the look and performance of your vehicle to your preffered performance settings.

Custom Koni Coilover units are also available for other “Struted” makes and models making happy owners of Commodores, Escorts, Cortina’s, Galants and Capri’s to name a few. Contact us for availability.

The Special price for this kit which includes 4 Koni FSD Shock Absorbers is $1100 Inc Gst. We can also fit these and set up your car with a complete wheel alignment for you at additional cost.

This offer only lasts while stocks last.

Eliminator Twin-Tube shock absorbers feature:

• Performance valve codes for the ultimate in handling and response.
• Servicable and rebuildable.
• Multi stage valving system to allow a progressive dampening effect from slow to fast piston velocity thus automatically adjusting to all road conditions.
• Heavy duty twin tube construction.
• Bonded heavy duty neoprene rubber eye mounting bushings with bonded inner crush tube.
• Robust 2mm thick external and internal walls.
• Huge 36mm internal bore with a seamless and polished inner tube for smoother action and less friction.
• Bonded sintered iron piston construction with multi stage valving for increased durability and accurate tolerances.
• Piston retainer nuts mechanically peened to stop failure at high temperature.
• Nylon mechanical top out bump stops.
• Shafts are manufactured from tough 22mm or 18mm hardened chrome, precision engineered to withstand the harshest of environments, while reducing friction and wear.
• Gas charged with low pressure nitrogen gas to maximize fade resistance under extreme conditions without harshness, while providing more responsive control.
• Fuchs brand oil outer
• Short body/short travel to suit lowered springs (up 3″ lower than Original Equipment), while still maintaining full suspension travel, bump stop clearance and maintaining spring entrapment.
• Option of short body strut part numbers with raised bottom spring seat/platform to suit up to 19″ diameter genuine wheels and some 20” diameter aftermarket wheels. (Up to 22″ diameter wheels in some applications).
• Every Lovells Eliminator strut and shock absorber is dyno tested after manufacture.

Lovells Eliminator struts and shock absorbers are covered by a 3 YEAR/70,000km WARRANTY

Value added extras

• Struts come complete with neoprene bellows boots/dust shields (when applicable).
• Shock absorbers come complete with neoprene shrouds. (when applicable).
• Struts and shock absorbers come complete with matched shortened bump stops if applicable.
• Struts and shock absorbers come complete with mounting hardware.
• Some struts and shock absorbers come with re movable spring platform spacers for incremental height adjustment

We hope these pages will give you an overview of the premises and our range of products along with our business ethos of total customer satisfaction which of course all our staff are committed to.

Our accumulated knowledge of suspension is best sourced by phone or visit as each enquiry requires an individual assessment of needs, preferences and budget. So when you are ready for whatever you need in suspension or wheel alignment, feel free to call us on (08) 9444 0500 or visit 28 Colray Avenue, Osborne Park.

Suspension work can be a repair for safety reasons or to keep your favourite car roadworthy through to the experience of improving your cars handling far beyond factory performance or to ultimate road or track performance, all depending on what you our customer desires.

So again welcome to our website and be assured, even when things get a bit hectic at times, we will do our best to continue to be the best suspension shop in Western Australia.